Medisafe Pico Benchtop Washer Disinfector
The Picrange of washer disinnfectors has been developed to comply with the latest decontamination standards. Pico provides controlled automated cleaning,disinfection,and drying of dental instruments (and hand pieces as an optional extra).
The combination of a high-pressure spray arm and the Pulse Flushing System ensures that your instruments and hand pieces are thoroughly cleaned and disinfected both internally and externally. Using the PICO automated washer disinfector demonstrates your compliance with documented best practice.
Pico’s one-touch operation offers the best option for the control and repeatability of the cleaning process; which in turn can be validated and documented to provide a permanent record of your decontamination procedure.
A brief description of the preset process parameters:
- Pre-wash – Using the high-pressure spray arm and the lumen flushing facility; cold water at a temperature no greater than 35 deg C is used to remove gross contamination from the external and internal parts of the instruments.
- Wash – Controlled temperature wash (40-45deg C) in combination with automatically dispensed enzyme detergent removes remaining residual bio burden inside and out.
- Rinse – Both high pressure spray arm and pulsed lumen flushing are utilised to remove all process residues and detergent from the surfaces of the instrument, leaving the instrument ready for the thermal disinfection process.
- Thermal disinfection – The temperature of the load is raised and held at the required disinfection holding time therefore rendering instruments safe for handling and inspection prior to the sterilisation process.
- Drying – Using the synergetic effect of latent heat and purged hot air circulation within the chamber removes residual moisture from the instruments and hand piece channels.
Fully installed and commissioned prices start from £4,333 (Exc. VAT)
| Related Items | |
|
|



